Northern Lights Custom Crossfit CrossBox

Northern Lights CrossBoxes are configurable and infinitely expandable with the ability to put pullup bars at different heights, customizable widths with 43" & 70" X-Bar components, customizable depths with 24", 43" & 70" XBar components, customizable heights with 90", 108", or 144" uprights, and choose from a group of accessories to make your CrossBox uses endless.

A common configuration would be to setup your Custom CrossBox in the center of the gym with alternating 4 foot and 6 foot upright spacing for alternating squat racks and pullup bars as far as your space will permit.

Start small and add to your CrossBox, the CrossBox can be expanded to accommodate the space you have available, configure the CrossBox for rings and different chin-up bars:

Where space is an issue, or you want a more permanent setup, the CrossBox can be setup without the rear legs by lagging the 43" or 70" XBar components to a wall, or choose an Crossbox configuration with a 30" depth:

Additional accessories like, Safety Spotter Arms and Multiple Pullup Bars, can be added so that everything you need for a workout is provided.

Northern Lights CrossBoxes are made in Canada from 2 X 3 11 Gauge powder coated steel with 5/8 Bolts and Fasteners. All of the uprights have the following Hole Pattern:

• 1 inch spacing through the bench and clean pull zone
• 2 inches everywhere else from the floor to the pull-up bars.

Features:

• Customizable 4' or 6' Width.
• 2 X 3 11 Gauge Steel.
• 5/8 Bolts, Fasteners.
• Customizable heights with 90", 108", or 144" uprights with 7" x 5" x 3/8" floor plates.
• Customizable Depths with 24", 43", or 70" XBars
• Uprights have the Hole Pattern  1 hole spacing through bench and clean pull zone then 2 hole spacing above and below from the ground to the pullup bars.
• Pullup Bar height is adjustable, Single bars can be substituted to accommodate taller athletes or add additional height for rings.
• 144" (12') upright configuration is ideal for using climbing ropes.
• Unit Must Be Bolted to the Floor.

Components:

• CBUPR090FP - 90" Upright with Floor Pad - MSRP $179.99
• CBUPR108FP - 108" Upright with Floor Pad - MSRP $200.00
• CBUPR144FP - 144" Upright with Floor Pad - MSRP $249.99
• CBXB2423S6 - X-Bar 2" x 3" x 24" - MSRP $69.00
• CBXB4323S6 - X-Bar 2" x 3" x 43" - MSRP $102.00
• CBXB7023S6 - X-Bar 2" x 3" x 70" - MSRP $135.00
• CBXB433BAR - X-Bar 43" Triple Bar - MSRP $115.00
• CBXB703BAR - X-Bar 70" Triple Bar - MSRP $175.00
• CBXB43FS1215 - X-bar 43" Fat/Skinny (1.25" & 1.5") - MSRP $105.00
• CBXB70FS1215 - X-Bar 70" Fat/Skinny (1.25" & 1.5") - MSRP $125.00
• CBXB436SB200 - X-Bar 43" Single Bar (2.00") - MSRP $85.00
• CBXB436SB150 - X-Bar 43" Single Bar (1.50") - MSRP $85.00
• CBXB436SB125 - X-Bar 43" Single Bar (1.25") - MSRP $85.00
• CBXB43MGCB - X-Bar 43" MultiGrip Chin Bar - MSRP $182.50
• CBMONKBAR43 - 43" Monkey Bar (1.25") - MSRP $69.99
• CBMONKBAR70 - 70" Monkey Bar (1.25")- MSRP $79.99

Accessories:

• CBCHINB43ADJ - 43" Adjustable ChinUp Bar (1.25") - MSRP $79.99
• CBBARHOLDERS - Bar Holder J-Hooks (pair) - MSRP $65.00
• CBSSARMS - Half Rack Safety Spotter Arms (pair) - MSRP $135.00
• CTRINGS - Gym rings with straps - MSRP $72.00
• NLFLAT - Flat Bench - MSRP $198.00
• NLINCF - Incline/Flat Bench - MSRP $308.00
• NLFID - Flat/Incline/Decline Bench - MSRP $488.00
• NLSTSUPERB - Stealth Super Bench - MSRP $598.00
• CTCLIMBR252 - 25' x 2" Climbing Rope - MSRP $225.00
• CBDIPATTCH - Dip Attachment - MSRP $98.99
• CBPS13SP - 13" Plate Storage Pin - MSRP $31.99
• CBSHACKLE - Shackle w/ Caribiner & Strap - MSRP $22.50
• CBGUNRACK6 - Gun Rack Set (Bar Holder) 6 Bars - MSRP $52.50